PF-4 Fluoride Filters


PF-4 Arsenic & Fluoride Reduction Elements (set of 4)

SKU: PF-4 Category:


PF-4 fluoride filters, manufactured by New Millennium Concepts LTD are designed for use with Super Sterasyl™ ceramic filtration elements to adsorb the following four unwanted elements most commonly found in drinking water.

Main Contaminants The PF-4 Fluoride Filters Remove or Reduce

  • MTBE (Methyl-tertiary-butyl-ether)
  • Fluoride
  • Lead
  • Arsenic

PF-4™ filters are also designed to adsorb:

  • DBCP (Dibromo-chloro-propane)
  • THMs (trihalomethanes)
  • Herbicides & Pesticides
  • Heavy Metal ions

Under normal conditions it is recommended that PF-4™ elements be replaced at six-month intervals (Actual capacity is dependent on the presence of other competing contaminants in the source water.

High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements.) Note: do not boil this element.

How To Install The PF-4 Fluoride Filters

They are very easy to install. It’s the same as the PF-2 filters.

Underneath the upper chamber you will see the stems of the ceramic filters above.

Just remove the blue cap from the PF-4’s and screw them on to the ceramic stems for a minimum of five revoluations.

Run water through the system twice because you will notice a white-like dust in the water.

After the second time you shouldn’t notice anymore dust and the water should be clean and ready to drink.

Not yet available in Iowa


There are no reviews yet.

Be the first to review “PF-4 Fluoride Filters”