1-800-392-3321
5 Great reasons to buy from us:
-
Made in the USA
-
365-Day Money-Back Guarantee
-
100% Satisfaction Guaranteed
-
Poison Free
-
We Use Encrypted SSL Security
PF-4 Arsenic & Fluoride Reduction Elements (set of 2)
--
PF-4 fluoride filters, manufactured by New Millennium Concepts LTD are designed for use with Super Sterasyl™ ceramic filtration elements to adsorb the following four unwanted elements most commonly found in drinking water.
These do not go with the Black Berkey® elements
Main Contaminants The PF-4 Fluoride Filters Remove or Reduce
- MTBE (Methyl-tertiary-butyl-ether)
- Lead
- Arsenic
PF-4™ filters are also designed to adsorb:
- DBCP (Dibromo-chloro-propane)
- THMs (trihalomethanes)
- Herbicides & Pesticides
- Heavy Metal ions
Under normal conditions it is recommended that PF-4™ elements be replaced at six-month intervals (Actual capacity is dependent on the presence of other competing contaminants in the source water.
High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements.) Note: do not boil this element.
How To Install The PF-4 Fluoride Filters
They are very easy to install. It's the same as the PF-2 filters.
Underneath the upper chamber you will see the stems of the ceramic filters above.
Just remove the blue cap from the PF-4's and screw them on to the ceramic stems for a minimum of five revoluations.
Run water through the system twice because you will notice a white-like dust in the water.
After the second time you shouldn't notice anymore dust and the water should be clean and ready to drink.
Not yet available in Iowa
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Description
PF-4 Arsenic & Fluoride Reduction Elements (set of 2)
--
PF-4 fluoride filters, manufactured by New Millennium Concepts LTD are designed for use with Super Sterasyl™ ceramic filtration elements to adsorb the following four unwanted elements most commonly found in drinking water.
These do not go with the Black Berkey® elements
Main Contaminants The PF-4 Fluoride Filters Remove or Reduce
- MTBE (Methyl-tertiary-butyl-ether)
- Lead
- Arsenic
PF-4™ filters are also designed to adsorb:
- DBCP (Dibromo-chloro-propane)
- THMs (trihalomethanes)
- Herbicides & Pesticides
- Heavy Metal ions
Under normal conditions it is recommended that PF-4™ elements be replaced at six-month intervals (Actual capacity is dependent on the presence of other competing contaminants in the source water.
High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements.) Note: do not boil this element.
How To Install The PF-4 Fluoride Filters
They are very easy to install. It's the same as the PF-2 filters.
Underneath the upper chamber you will see the stems of the ceramic filters above.
Just remove the blue cap from the PF-4's and screw them on to the ceramic stems for a minimum of five revoluations.
Run water through the system twice because you will notice a white-like dust in the water.
After the second time you shouldn't notice anymore dust and the water should be clean and ready to drink.
Not yet available in Iowa
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1 business day. |
Reviews
Related Products
